Create a new WinHelp Output

To generate WinHelp output, you need to create an Output that is based on the WinHelp Output Engine:

  1. Select the Outputs node in the Project tree view
  2. Click New on the local toolbar.
  3. Select WinHelp Output Engine and click OK
  4. Click OK in the following dialog

The .HPJ file will be located in the directory "WinHelp" (or "WinHelp1" if you have several WinHelp outputs) under your project directory.

Before you can build the output, you must make sure you have a path to the MS Help Compiler. See Setting the WinHelp compiler location.

HTML generated by Time2HELP